I would recommend printing both halves of the blade, the blade pins and blade insert at 0.1mm layer height and everything else can be printed at 0.2mm.

All of the files are orientated for the best results.

Video of how it works:

https://www.youtube.com/shorts/Dh6n3iah2aM

Assembly

Attach the latch to the handle with the both the back pins gluing the back pins together Put the blade together by gluing both halves with the blade insert to help align them Test the tolerances between the blade and the handle first before gluing the blade pins on.( if you need, sand the blade down a tiny bit for a nicer fit.) Finally glue the blade pins onto the blade, putting them through the track in the handle.